MULTI STRIP is a broad spectrum blend of specialty solvents for use in the stripping of difficult to remove sealers. Usage rate depends on the surface being cleaned and the number of coats of sealer on the surface. Most sealers can be removed with MULTI STRIP.
MULTI STRIP should be applied neat, directly onto area to be stripped and scrubbed vigorously with a nylon scrubbing brush. This application and action will have a melting effect on the sealer. Only small areas should be attempted as MULTI STRIP evaporates quite quickly. This sealer should then be removed with cloths or rags soaked in MULTI STRIP. Repeat if necessary. A test as to the effectiveness of this stripper is necessary in a small area first prior to use on larger areas.
Particular care should be taken not to deposit melted sealer onto grout lines.
Use product neat, directly from can. 1 Litre will strip 4 10 square metres.
IMPORTANT NOTICE TO CUSTOMER
Since the use of this product is beyond the control of either seller or manufacturer, their only obligation shall be to replace any quantity of product, which is proven defective. They cannot assume any risk or liability in excess of the purchase price of the product itself, which does not include labour or any consequential damages resulting from the use of this product. Determining the suitability of this product for any intended use shall be solely the responsibility of the user. ALWAYS TEST FIRST.